CASES, Operating, Remote Receivers, WS Cdn No. 52. ZA/CAN 4729
I started work on the repair of the big wood chip in the lip of the case lid this afternoon.
Wood glue was placed between the section of wood still attached to the lid, and the lid itself. I then slid a small piece of paper up against the side of the lip, where the clamp was going to go, and then applied the clamp. I do this simply to keep the clamp surfaces clean. Any paper that happens to stick to the wood after, is easily sanded away, at that stage of the restoration.
Tomorrow afternoon, when the 24-hour cure is up for the glue, I will start applying wood filler to the area where the original Pine board is missing.
David
|