king bearings
I have seen that type of thing before .
It can be caused by badly adjusted or incorrectly fitted king pin / swivel bearings . Does your vehicle have tapered roller bearings on both the upper and lower sides ? The pre load on the swivel bearings needs to be set according to the manual . Some of these older 4X4's used a bronze cone on one side, Dodges I think . Mike
__________________
1940 cab 11 C8
1940 Morris-Commercial PU
1941 Morris-Commercial CS8
1940 Chev. 15cwt GS Van ( Aust.)
1942-45 Jeep salad
|