Quote:
Originally Posted by Jon Skagfeld
Scott: Perhaps I can help in some small way...
TM 11-5820-401-12 (Aug '72) gives line diagrams for all the AN/VRC-12 family. As you are probably aware, there are a bewildering number of cable lengths especially the 4723 and 4720. The only reference I've seen citing cable lengths was contained in an e-mail on this forum from Rob Love which was extracted from EME Manual ELECTRICAL L179/5.
TM 11-5820-401-10-1 (Feb '81) is more recent and shows a MUTT on the front page.
Do you have the Bendix connector for the mod to the 4720 power cable?
|
Jon,
I was lucky enough to get that Cable from the Batteries to the Female Bendix (IKEE) with the Mounting Tab along with a 4' Cable with the Male end Bendix to run to the Right Side MT-1029. I also have the 3' Cable the goes from the MT-1029 to the C-2299. I actually have 2 x 10' spare Male Bendix Cables if anyone needs one.
My issue is the correct cable lengths for the Power Cable thats slaves power from the Right MT-1029 over to the Left MT-1029 and the Cable from the Left MT-1029 to the C-2299. I can start mixing and matching until I find the right lengths. The AMU Power and Coax Cables will be later.
I was hoping maybe the lists were out there to create a parts list of sorts that addressed the correct Cable Lengths and the other little snippits for oh say, Dial IKEE in an M38A1 etc etc. Maybe its something we can create with folks imput?
Jon, give me a call one of these days when you've got more then 2 min
Scotty