Quote:
Originally Posted by David Dunlop
The clip at the "R" position inside the Connector Socket at the rear of the receiver is missing. The broken screw shaft is still visible in the bakelite.
|
The 'R' position is not needed for the Remote Receiver - it's the transmit/receive relay line and the relay grounds the aerial input in the receiver and mutes the audio amplifier (via the -1200V line that provides cathode bias to the PA stage.) (It doesn't have -1200 volts on it, just the 813 cathode bias voltage, I assume.)
If you need a spare connector I can post you the ones I have here as a source for spare contacts - the contacts are retained by a screw and nut so should be easy to swap out.
Chris.
(Who will eventually get to the Post Office - honest!)
