Quote:
Originally Posted by Private_collector
I have a couple of the metal alternatives to the wood blocks. They are highly corroded, but will make good patterns, should the need arise in future. They are two different sizes. One is considerably larger than required for a SMLE. A number of months ago I had the fortune to have a brief play with a BREN, and it struck me that the larger metal block would have been roughly the size of the BREN butt. The truck I cut these off had a 'gallows' bracket still attached (which I also kept), and the piece I was particularly wanting, a 'sunshine roof'. Could that part be for a BREN, I wonder.
|
I have been sorting through some of my bits and pieces and rediscovered these two items.
Just wondering if they were for a Bren or LAAMG as the vehicle I removed them from had the LAAMG gallows bracket on the side of the cabin. They were both behind the passenger side seat while the driver's side had a regular wooden butt socket and standard .303 rifle holder behind it.
The metal butt holder had the remains of split rivets in the 16 holes which held what looked like thick felt to protect the rifle butt. Size is 170mm long x 70mm wide x 62mm deep.
I cleaned up the steel butt socket mainly as a pattern. The steel was quite wasted with a few holes in it. Looks better in the picture than in real life. Bit like E-dating sites!
Any info from Blitz armaments experts will be greatly appreciated.
Cheers,