Hi Keith
Great idea, I have been frustrated in the past by not being able to make this wiring harness information understandable, and usable. I have Chevy Pat 13 Late, Pat 13 Early, and Pat 12 harnesses staked out on large plywood panels, which I have used to make harnesses for my own CMPs and a few others. (No I'm not looking to do more harnesses until I get 3 other restoration projects out of my shop. I have not really been able to work in the shop for 3 months because of a shoulder problem.)
My problem is in figuring out how to reproduce at full size these boards to share with people. Take a look at what is already up on my website
http://www.canadianmilitarypattern.c...nformation.htm
http://www.canadianmilitarypattern.c...%20Harness.htm
What can be done practically to make this information in particular the pin panels reproducible? Any thoughts or tricks for making digital photos which can produce 1 to 1 size accuracy? These things are huge 3 x 8 feet.
What I've done is spread out on paper covered plywood the complete harnesses from my trucks, which fortunately had not been butchered or modified. Each branch has been fastened down with notes on each lead. Wiring diagram ID number, function, gauge and color code.
Some good news the differences for the Chevy Pat 13 to accommodate the different wheelbases is simple as all the harness are the same back to the connections inline with the transfer case the rear harness then is simple to adjust for 101, 134, or 158 wheel base. The differences for the different dash is similarly relatively easy to account for by making all the dash leads longer.
This is an interesting project and hope that we can add this information succesfully to the CMP knowledge base.
Cheers Phil