Thread
:
Question - 19 set power supply.
View Single Post
#
6
24-09-12, 13:35
Bruce MacMillan
a Canuck/Brit in Blighty
Join Date: Jul 2004
Location: Hell Fire Corner, Kent UK
Posts: 703
ok, 24v is a whole different ball game (or hockey).
For a 2 wire 24v supply the negative goes to pin 1 and the positive goes to pin 4.
Set the switch inside the power supply to 24v.
You can only use the dynamotor position, the vibrator is disabled.
Bruce MacMillan
View Public Profile
Find all posts by Bruce MacMillan