View Single Post
  #11  
Old 17-12-19, 23:18
Tony Smith's Avatar
Tony Smith Tony Smith is offline
No1, Mk 2** (I'm back!)
 
Join Date: Feb 2003
Location: Lithgow, NSW, Australia
Posts: 5,042
Default

Be careful of the ply rating of the 8.25s. Most 7.50-20 were 8 or 10 ply tyres, while the 8.25s are usually 10, 12, or 14 ply. A rough ride will be the result, shaking you to bits.

Are you running duals on the rear axle? Unless your rims have the correct offset for 8.25s, when loaded the tyres will foul each other.

And check clearance around the front end, turning circle can be reduced if the tyres foul the springs or chassis.

I've no experience specifically with Chevs, but early Ford trucks were 6.00-20 and fitting 7.00 or 7.50 tyres led to all sorts of problems with gearing, braking, steering geometry and turning circle. But they were cheaper, carried a heavier load and more readily available than 6.00-20's. Sound familiar?
Attached Thumbnails
ttw-rk-spacingdisc.gif   IMG_7903.JPG  
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should!

Last edited by Tony Smith; 17-12-19 at 23:25.
Reply With Quote