View Single Post
  #10  
Old 02-07-08, 13:25
Tony Smith's Avatar
Tony Smith Tony Smith is offline
No1, Mk 2** (I'm back!)
 
Join Date: Feb 2003
Location: Lithgow, NSW, Australia
Posts: 5,042
Default

Quote:
Originally Posted by Rob Beale View Post
This pic shows the set up with the cast extension on the rear axle protuding forward, and the round collar on the back of the gearbox mating to it.

I notice there is no gear on your gearbox outbox shaft - this fits to a matching female gear on the axle pinion.

Rob
A Carrier rear axle assembly has been found, but as Rob has said, we're now in need of the dog gear that goes on the output of the gearbox and meshes inside the splines of the gear on the diff pinion. With 6 internal splines and 16 external teeth, would this have used a gear from in the gearbox, namely the sliding 1st-Rev gear?
Attached Thumbnails
IMG_4738.JPG   IMG_4739.JPG   IMG_4787.JPG  
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should!

Last edited by Tony Smith; 02-07-08 at 13:33.
Reply With Quote