Hi guys. I got the oportunity to make templates from the truck on the Norwegian Army Museums C15 (which actually is for sale, see link:
http://retrade.no/aitem?aitem_id=120136).
Take a look at the pictures below.
The bow is an original from the norwegian army museum and truck on the link. The flat iron hook is 19 millimeters or 3/4" wide.
But as you can se on the other picture the distance between the edges for the hook on my cargo bed is 24 millimeters. I presume the top bow will move a lot back and forth if I use 3/4" flat iron on my bows.
I believe the cargo bed on the museums C15 is early type 2C1 and mine is late type 2J1.
Was there a change of specifications on these bows at some point?? Or should it just be 3/4" on both types ?? 24 millimeters is also a very strange inch meassure15/16"?? But perhaps it should be 7/8" wide? I believe my tubing should be 1" but on the muesums truck it was 7/8".
Does anyone have a 2J1 cargo bed bows and can meassure the hooks and bows?
I did not meassure the distance on the cargo bed in the museum.
http://www.surfacezero.com/g503/uplo.../IMG_08673.JPG
http://www.surfacezero.com/g503/uplo...918_-_Kopi.JPG
Svenn