carrier exhaust boxs
Hi,
I am making some carrier exhaust boxs at the moment, I have both kinds of the original ones here (squared off and rounded top ones). I have the exhaust bafflers made up and am working on the pipe bends at the moment, I think I can knock them out for £200 a set of two which includes the long pipes back to the exhaust cast floor plates, so basically a complete exhaust system in mild steel. The long pipes would be welded to the bottom bend as per originals. Ideally these exhausts are best fitted with the rear axle removed but can be fitted with the axle in place if you remove the rear tool plate and have plenty of patience and ground clearance to twist them into position, (those who have done it know what I am talking about), last thing you want is to put a connecting clamp between the bottom bend and the straight pipe part. I will post some picks once I have the bends made and welded.
kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008.
3" Mortar Universal Carrier 1943 registered 06/06/2009.
1941 Standard Mk1 stowage Carrier, Caunter camo.
1941 Standard Mk1 stowage Carrier, light stone.
10 cwt wartime mortar trailer.
1943 Mk2 Daimler Dingo.
1943 Willys MB.
1936 Vickers MG carrier No1 Mk1 CMM 985.
|