View Single Post
  #14  
Old 23-01-22, 21:41
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default Have you tried......

A pry bar????

Remove the sheet metal cover at the bottom of the bell housing..... it will reveal the ring gear......... with a long, long flat tip screwdriver try prying the flywheel using the teeth one way then the other....back and forth....... you may need to pour more diesel even into the carb intake ...... literally flood it.... let it sit and try the pry bar again and again back and forth......

If it does not work.....quit....no point being fanatical about it...... it will need to be taken apart........

Good luck....
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote