View Single Post
  #7  
Old 12-01-23, 04:43
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 859
Default Home-made Spray-painting cabinet- test run

Good day,

Well, with the festive season well behind us, I finished installing the flexible duct and decided to give it a test run.

The length of the duct allows the fan to be placed another 4 metres outside the door and allows the booth to be oriented to get the best light under the Laserlite roof panels.

Tested the airflow with a lit candle and the flame was only slightly disturbed at all places within the cabinet.

I pulled the bottom of the filter away and there was enough of a pressure difference to snap the filter back into place when I let it go. Just as the filter salesman had told me! My fears of a "wind tunnel" effect were unfounded.

The acid test of course will be when I fire up the spray gun, but not while it is 35C outside and 40C inside the shed.
Attached Thumbnails
IMG_0187.JPG  
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote