Guys,
I'm starting to learn the finer details of the English term "fettling". I took the Lynx out for a spin before heading off to the Gatineau Air Show, when I found out that I could no longer engage fourth gear. After several attempts and severe grinding I trundled home in third.
I then attempted to adjust the clutch linkage with no success, I then talked over the problem with Robin Craig, who was able to persuade Gerry Foster to travel from Gananoque to try and resolve the issue.
In short order Gerry was able to determine that the issue was not with the clutch, but the shifter linkage, and zeroed in on the base of the shifter column which was corroded and sloppy. Partially rebuilt by myself.
The shifter column is now out and off for a proper rebuild.
Don't know where I would be without friends and MLU.
Peter