Everything that I can fit to the drivetrain has now been done and I trial fitted the axle and tube which has not ever been together like this since I made the gearbox. A bit of modification was required to some holes to get all the bolts in but I'm happy with the result. Went over all the bolts as once in place it is extremely difficult to get access to certain areas and now is the time to do it. Tomorrow will be drilling and tapping holes in the side as there is a few broken and it is easier to fix now before the drive goes back in, There is a few other jobs inside the hull that I will complete first which means I will remove the turret off Bower Bird as well. It just makes sense rather than leaning, bending and crouching.
|