Mike C and Mike K
After reading The Authority on a web site saying that 1940 utes had no stamped chassis number and were identified by engine number and data plate serial it really did not seem right.
So after stripping the chassis I found this. Can you blokes advance the cause with that information (I have picked the very light stamping out with white-out so it can be easily read)
Mike K. The vehicle came with tyres fitted to wider rims which the owner said was original. He also gave me 5 good rims from a car that are a full inch narrower, Hubcaps the same on both. I have fitted 205R85-16 which are close to the same height as the 7.00-16 offered by GMH for Military (and probably commercial use also).
|