This is the problem with kit being made in three countries, each of which has their own part numbering scheme!
I found the wallet containing the installation documents for M4 Medium Tank 76mm and it's American. That said, the Installation Kit Register does go down to nut and bolt level...
1 Clips, Cable Fixing, Sets No. 302 PC/USA59442 ZA/USA0442
15 Detail 1 ----------------------- PC/USA59425 ZA/USA0425
05 Detail 2 ----------------------- PC/USA59426 ZA/USA0426
15 Detail 3 ----------------------- PC/USA59427 ZA/USA0427
I also found 10 x ZA15154 and 8 x ZA15153 cable clips.
I can't find any cross-reference at present, but ZA15154 is for a single braided cable about 0.75 to 1-in diameter and ZA15153 is for about 0.5-in cables (so may be for the cable between the rotary base junction and J.D.3 or possibly the Leads, Aerial (A set to variometer or B set to aerial base), but it seems a bit small diameter for that purpose).
Somewhere I have some boxed American clips (one size only, which will most likely be "wrong" of course) which may give me a clue as to the numbering systems.
Best regards,
Chris.
Last edited by Chris Suslowicz; 11-04-20 at 16:29.
Reason: Tab damage
|