I 'as gone dun and dunnit....
That snap ring must fit the front hub........
Openings on front and back of tranny is 3 1/8 and 3 5/16
....but is the right size for the front hub...... fits inside the hub......behind the outer bearing race....... So now you know!!!!
Didn't realize that I have about 6 inches of fresh snow around the barn..... its snow blower time again......
According to the parts manual these are referred to as shims and come in sizes of .005 to .045......... and if so are probably part of the bearing preload that must be adjusted...... my MB-C2 is unfortunately in the barn..... and I ain't going back there right away....!!!!!
Bobby Pein
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
|