View Single Post
  #2  
Old 06-05-05, 00:38
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,929
Default Bearings and seals

Bob- I've been using Motion Industries https://www.motionmro.com/motion3/jsp/mi/index.jsp they have branches/dealers in Canada and the US though I just set up an account with them and the UPS the seals directly to me. Some fo the seals I crossed over from the Victor numbers stamped on the seals some crossed over some didn't in either case I check the dimensions before ordering. They also carry speed-sleeves, which I am going to use sleeves on some of the worn bearing surfaces like input and out put shafts on the transfer case. Even going to try a sleeve on the rear main seal area of the crankshaft. They have speed-sleeves that I think could be used to repair worn front axle hubs.

I'll put together a list of new numbers and locations used and send it. Can’t find my order sheet at the moment.

Cheers
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote