COIL, Aerial Tuning No. 2 A ZA/CAN 4725
And the plating of hardware and reassembly begins.
Just the two easy parts back on so far but already I have discovered the need to carefully ream out excess paint from all the hardware holes before reinstallation of parts, especially the smaller items. This hardware is all brass and the smaller it is, the more likely I will damage the hardware trying to force it though holes clogged with excess paint. Drill bits work very well at this.
Also was able to get a short time exposure shot of the two new decals on the front panel glowing in the dark.
David
|