[David Dunlop]

Last evening, I did a quick test on the glue residue left on the lower right side of the front panel and it look like it will remove OK with a little careful work and soaking with a glue solvent I have on hand.

I also started some online research on anything I could find about these switchboards, and in particular anything about the MK I Model. Surprisingly, I got a hit from the MLU Forum regarding the Week 37 Wireless of the Week Series Bruce Parker had put together several years ago. Week 37 covered the Switchboard Charging 5C Canadian and in it was a post from Jordan Baker who had run across a photo of a 5C MK I, Serial Number C183, also a 1944 product of Rogers Majestic. The comments back then suggest this variation was intended for the 19-Set HP and the 52-Set as both were rather power hungry wireless sets, and it was noted a new inboard pair of terminal posts were added on the upper portion of each side. The left set are marked, BATT, NO 1, CHARGE. The pair on the right BATT, NO 2, CHARGE. Upon a closer inspection of my switchboard, I now noticed where these additions were located, but the upper terminal post on each side is missing. Clearly the next step will have to be removing the plywood rear cover to see what has been going on with the wiring. I am hoping the terminals were simply removed, but not the related wiring.

In the meantime, I remember a Forum Member a few years back was parting out a Switchboard Charging 5C. If anyone has one being parted out, please get in touch with me. I suspect even a British one will have identical terminal post assemblies.

Be nice to confirm exactly why these two new sets of terminal posts were added and how they function. I have seen wiring diagrams for the original version of these switchboards, so there must also be ones issued for the 5C MK I.


David