COIL, Aerial Tuning No. 2 A ZA/CAN 4725
This morning I was able to mark the centrelines for the two paint pad stencils after they were trimmed to fit the front panel of the Coil assembly. I then applied a thin coat of Rubber Cement to the back of each stencil around the cutouts and got them aligned on the front panel.
The centreline markings re all in black White Board pen so will wipe off the peel jut fine when finished. The interesting part, however, is going to be how long it takes for the Rubber Cement to dry. I have only ever done this work before with manila sheet. this is th first time trying it with plastic stencil stock, so it should be interesting as to how long this step takes. The Rubber Cement has to dry before I can rub off any excess from the areas to be painted.
David
|