CONNECTORS, Single, 16-inch, Aerial, No. C1 ZA/CAN 4266
I have started to take a look at this little CONNECTORS Cable, and for the size of it, it is proving quite challenging.
For starters, there are two HT Electrical Wire specs lurking out there: 7mm and 5/16-inch. Convert those to decimal inch and you get 0.2755 and 0.312 inch respectively.
The Plug at one end of the CONNECTORS is supposed to have a bore of 0.295 inch diameter and the LUG at the other end an 11/32-inch bore which equates to 0.343 inch.
As you can see, one cable will be a sloppy fit and the other will not fit one of the terminal ends at all. Interesting.
So, does anyone possibly have one of these CONNECTORS sitting unneeded in a corner of the workshop somewhere, I can purchase?
Another small wrinkle appears to be that early production of this CONNECTORS used a shorter Plug than later production, but either will work between the Sender and the Coil, Aerial Tuning Assembly.
David
|