[Ganmain Tony]

What a Saga!

Finally has come to an end.

Mac's cables are no good. Spring end that goes to the actuator in the drum is way too short.

Tried to get longer cables made in the new old stock ones... no good.

Decided to take a risk and modify the new old stock ones ourselves.

Had some amazing help again from a capable neighbour, below is what we did.

Step 1 get the steel cover off the end of the outer conduit.

Step 2 Hold back steel cover with pliers

Step 3 cut outer conduit whilst praying you don't cut the cable

Step 4 breath sigh of relief then realise you have to cut another inner section with grinder and pray you don't cut the cable.

Step 5 Stay tuned