Quote:
Originally Posted by andrew honychurch
Has anyone got first hand knowledge and experience of the Stromberg item and whether it was necessary to fit a high performance coil etc etc. ?
|
Hi Andrew,
I don't have any experience on this distributor, but on the link you posted is another link to the owners manual and the following explains what the coil requirement is:
WARNING!
The e-FIRE ignition module must be used with a points style coil only, with a resistance in the primary circuit of at least 3.0 Ohms (Ω) or 1.5 Ohms with a ballast resistor. DO NOT use a low-resistance or HEI-style coil. Coils of less than 1.5 Ohms resistance are not suitable and will invalidate the warranty.
regards, Richard
__________________
Richard
1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2
Member of MVT, IMPS, MVG of NSW, KVE and AMVCS
KVE President & KVE News Editor
|