Quote:
Originally Posted by John Ward
Does that mean there was a shortage of gas-resisting KGJ paint in ~Jan 1943?
Because if I remember correctly, gas-resisting KGJ was already issued in MC319 Jul 1942 (before that it was still non gas-resisting, i.e. MC301 Jan 1942).
|
John, your question suggests you may have misconstrued Army paint vocab which changed in 1942 when DHS paints including KG-J were introduced. Prior to 1942 there was only ONE paint approved for use in Australia, that being Khaki Green No.3 which was gas resistant under military specification M.G.O./AUST. 101A. During 1942 however, the introduction of DHS Camouflage Paints produced under S.A.A. Emergency specifications (E) K 506-508, which made no provision for gas resisting paint, gave rise to the need when ordering paint in the field to specify two things:
1. Paint Colour required (A.S.C. letter code).
2. Paint Type required (gas resisting / non gas resisting).
Obviously the term “Khaki Green No.3” does not enter into this equation. It is denoted by Paint Colour: A.S.C. “J” and Paint Type: “gas resisting”. Hence the language used in MC319:
The basic colour of vehicles for use in Australia is Khaki Green A.S.C. “J”, gas resisting, and the disruptive colour is to be Light Earth A.S.C. “W”.
Subsequently in 1943 when DHS Camouflage Paints were replaced by Army Camouflage Paints (“Vehicle” colours) the paint vocab reverted to pre-42 usage: “Khaki Green No.3”.
75 years later, as restorers and modellers, we need concern ourselves only with “Khaki Green No.3” because
THAT was Australian Army Service Colour from 1940 to 1949, and
THAT was the high tech gas resisting alkyd enamel paint, and
THAT was the paint used in vehicle production. The term “Khaki Green J” refers to DHS Camouflage Paint, which was cheap and nasty Flat Oil Paint produced to lowest cost under Emergency specifications which even Dakin himself declared useless:
Quote:
|
Copies of the original Australian paint specifications are appended. They proved almost useless in practice. A revision of the Flat Oil Paint specification made in February 1943 should indicate the difficulties of achieving satisfactory results under the first specifications.
|
It should always be remembered that DHS Paints were NOT automotive paints and were NEVER intended for use on vehicles. I’ve attached some documents to help illustrate this point. Also a photo of Matt Austin’s K5 Inter showing 75 year old KG3 paint colour revived with nothing but a wet rag, demonstrating the remarkable durability of ARMY SPEC paint in stark contrast to the abject failure of DHS SPEC paint such as KG-J.
It’s a great shame Gina tried to promote “Khaki J” in this thread and spread so much disinformation for 3 years. I’m hoping we can get beyond that and start exploring Army Standard Colours which have been neglected for so long.
