Dole primer pump receives It's fuel from a T in the fuel line on the right side of the frame near the starter, and injects in into nozzles into the intake located on the carb side of the engine (one front and one back)head next to the carb. Usually this system is disconnected and the nozzles were not in the replacement engines, rather the holes would be capped.
Fording control cable controls two 90° valves, one at the PCV valve located near the fuel pump, and one between the intake air and the oil filler tube. These are most often found wired up, hopefully in the open position.
No fuel to the carb? Remove the line at the carb, add on a piece of rubber fuel line and suck. You are going to get the great taste of gas, but you will then know the potenti9al is there to draw fuel. Once you have your mouthful of gas, crank the engine and see if fuel is spurting from your freshly primed system.
There are other ways of doing it, but I'm giving you the quick and easy, albeit not tasty, method.
|