[jack neville]

Second tank completed. The ends and baffles on the second were not as good so I put them in the electrolysis bath for a few days. The ends have some fine pin holes in them. I then had them re-zinced at a local electroplaters. Before reassembly I ran some solder over the holes on the inside of the ends and then put it all together. They now only need pressure testing and painting.

Chris had painted both rooves and all the timber inserts.
These have been reassembled and the first one installed. Timbers for the spare wheel carrier have been cut and fitted. The timber doesn't bolt down satisfactorily to the roof contour and i am thinking of steaming it to get it to hold its shape. My plan is to crank up my Wiles Cooker to provide the steam and pump it into a piece of pvc pipe. A job for later.