Usually........
Both tank sender units will need replacing with a 12 volts sender..... about $50 US dollars........ and they will bolt right in to your tank..... it they will look slightly different
In your dash just before the fuel gauge you will need a voltage reducer from 12 to 6 volts....... bolts right on the stud of the gauge....worth about $15 US.
Have you. Insidered cleaning up the inside of the fuel tank and possibly installing a tank liner/sealer while at this stage?..... now is the time to do it.
Wiring...... the existing wiring if not all dried up should be adequate........ I used a new wiring harness made of 16 gauge wires.
Good luck.
Cheers
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
|