[Bob Carriere]

I am using M37 wiper blades...... supposed to be NOS..... so dry and hard.

You might want to clean the rubber with a 300 or 400 grit sand paper and use rainex compound on both the inside and outside of your windshield.......

At best they will allow you to meet the legal requirements........ on your best day they will wipe a little bit........... best to stay home in bad storms.

I took my wiper motor apart ....cleaned up all the dried grease, bugs, spider webs and reassembled with synthetic silicon grease..... very lightly on the grease............... they work real well flapping away while going down hill on engine compression and 25+ in. of vacuum..... otherwise stick you head out the side window. We found wiper gaskets on Ebay at $20 a pair.... yes you need two per side...... then decided to use the scanner and photocopy them on light card stock and smear the card stock with silicone..... works beautiful but you need an Xacto knife to cut out the gasket and the intricate holes and slots into the gasket...... but it works!!!!

Cheers

Cheers