Tire Instal Part 4
Now for the dry run.....
Pic 17- Tire is just barely balanced on the bottom half of the rim. Actually had a tendency to iether slip on one side or the other.
Pic 18 Looking at the isnde of this dry mount....... the side further form the camera was slightly lower than the front side..... that is where the tool comes handy in leveling this difference.
Pic 19 We have installed the top cross inside the rim....... a little tricky as the side walls were stiff and the push block had to be squeezed in. Two bolts are installed for this dry installation/illustration.
Pic 20 & 21 shows how the push blocks are resting on the bead. Not even at this stage but when we do the actual installation the high side would be srewed down first then alternate to keep the cross even.
Now we move on to the actual SNOTHY installation.
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Last edited by Bob Carriere; 05-01-16 at 03:10.
|