Those look like the right clips.
I printed an inverted image of the unit and drew in where it looked like the folds are on the doors. The top fold on the right door is about 3/4" wide and the bottom and center folds about 1/4" with none showing on the hinge side. If they overlap the body of the unit this makes sense. The top is wider for dust protection, the hinge side can't have a fold, and the other two for strength. A quarter inch overlap on the bottom wouldn't get to the wires to cause problems.
The left door in Ron's pictures shows a line about a half inch on from the center edge. That could be the step Chris referred to. So maybe 20 or 22 gauge like car tin? I guess I'm talking old car tin!
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
Last edited by cletrac (RIP); 02-03-15 at 04:33.
|