Quote:
Originally Posted by Hanno Spoelstra
While the B52 belts are 35 mm shorter, it will help getting the generator lower down on the adjustment bolt. Stay tuned!
|
Well.... Tried fitting the B52 belts yesterday, but they don't fit. With the generator in the lowest position, the belts would not fit over the pulleys. I might have been able to force them on with a screwdriver, but there should be enough slack to fit them by hand.
So I fitted an unworn BTR 51050, which is a B53 size. Those went on easily, but the generator still sits high on the adjustment bolt.
Maybe I should try a B52-1/2.
H.
