centre tie rods ends
I checked a few jeeps and some NOS tie rod ends. The diameter of the body at the end of the centre tie rod end (where it is a tight fit) is 1-7/16" for NOS part. It is possible that repro parts have a thicker body which would rub against the other tie rod. However I checked 4 CDN2/3 M38A1's and they all have very little or no clearance where you are having your problem. My 1953 M38A1 has about 1/8" or more clearance.
Maybe this lack of clearance was not a problem as long as the part could be installed tightly. There would seem to be very little differential motion at this tight spot when the wheels are turned. ..... Brian
|