[Darrin Wright]

Sunday I worked on the engine cover, stripped it down and replaced all the welded in nuts that secure the top grill section and the lower rear covers. Removed the weapon mount post from the top grill as it was broken.
Straightened the rear section of the engine cover as it was bent.
Also straightened the area around where the side engine cover panels go, had to trim the side covers as something is not quite straight. Marked out where the top catches will be welded.
Took some pics of the camouflage paint pattern for when it gets re-painted. You can never have enough pictures, and when it goes back together and painted I will wonder why I did not take a pic of..... when it was all in pieces.
Removed the 4 knurled knobs that secure the lower covers, will get them remade as the threaded sections are partially rusted away and they are a little bent.
From an old salvaged part of a gear lever assembly that was laying around, I heated (carefully as it is brass) it up and removed the gear lever shaft from the front mount for the gear lever. This will be sandblasted and go back it later.