Quote:
Originally Posted by rmgill
Two problems...
One, Vandal has a charging system problem.
The generator is getting 2 or less volts on field current and not putting out any voltage. It does put out voltage if I jumper B+ to Field for a moment, upwards of 20 volts (I don't do that for very long).
Two, in the process of troubleshooting this I managed to blow the main fuse and we have no more. Anyone know where I can get the CAV type 50 amp main fuse from? It appears to be lead, I was thinking of making a replica out of 1/2 the thickness .005 brass sheet and then tinning it to see if that would work (start smaller). But, I'd rather use a proper thing and not have the risk of frying wiring I spent so much time installing. So, does anyone know where the CAV clip on fuses may be had from?
|
Ryan,
If you go to the workshop manual it explains the tests to be carried out, one like Lynn says, is to motor it over, a good basic test. Could be a dirty commutator, or sticking/worn brushes, or presence of oil or grease. As for the fuse, don't think it is lead, should be a thin aluminium, easiest thing is to source some fuse wire of 50 amps rating.