Dual sets were used for maintaining a net on two frequencies. The other role of using dual RT-524 was to use the second RT-524 set to receive on one frequency and then re-transmit the signal on a second frequency. The principle is the same as a commercial or amateur radio repeater. That way, two stations who can not recieve and transmit to each other directly, can work each other through the dual station.
Yes, but in order to do that you must have a C2299 Control Box fitted, with the appropriate cabling.
My M38A1CDN3's whole history was with 1RCR, so I mounted dual radios as C/S 91 (Sig O attach/posted to 1RCR).So, I'm surmising that the Sig O, being part of the CO's Rover group, could position himself wherever he saw fit in order to facilitate any retransmission requirement.
I installed an RT-524A and an AN/VRC-125 in an AN/VRC-49 configuration...the 125 working down to the coys, the 524 working up to Bde.
__________________
PRONTO SENDS
|