things seem so slow going at the moment, I dont know whether its the hot weather we are having or the lack of the hull for me to be geeting along with, but anyway, I have done half my bogie units now. For some reason I was not looking forward to the job of cleaning all the bearings and seals and washers and putting them all back together. I must be getting overly sensitive to dirty nails in my older age! Anyway, I did two of the units today, taking my time and sitting down for a rest in the sun every now and again.
Its all pretty straight forward, nothing really to be aware off other than trying to line up the hubs, guides bushes and washers so that the axle spindle will go through. In the book they recommend a large spindle sized taper driver which would align everything. Not having one of those I had to use the mark one eyeball but it worked. here are some photos and I have updated the photobucket site as well
http://s714.photobucket.com/albums/w...sal%20Carrier/