Quote:
Originally Posted by Bob Moseley
Hey Tony - I thought we had been through this. You need to know if it is valves or rings so do the oil test as I suggested. It is pointless adjusting the valves if it is a ring problem.
 Bob
|
Tony
Have you squirted some oil down the cylinder .. then re-done the comp. test ?
If it has a broken ring , stuck ring or worn rings etc.... then , after the oil squirt , the compression will come up , it seals the rings to some degree .
If the compression doesn't change , then you most likely have a leaky valve seat .
But before pulling the head off, do the valve tappet adjustment , it might be just a tappet nut come loose holding the valve open ?
MIKE