Hi Collin
Have 2 Mark2/3 Ferrits Have also added electrick fuel pumps work great. In the process of haveing carb kits made for the solex 40NNIP kits will have all gasket and diaphrams and sealing washers. Diaphram material getting very hard to get as some of the thicknesses not being manufactured any more. To Replace original fuel pump or starter can be done by slidding the fuel tank forward. Lossen electical boxs by fuel filter to get enough slack in electicalcables and disconect fuel line from firewall. Rear seat and radio box slides etc must be removed so fuel tank can slide along top of transfere case. remove 4 bolts holding tank. It will slide far enoughforward for easy access. Be sure to grease rear universal joints while they are exposed. Hope this is of some help Arlon Bauer
|