View Single Post
  #1  
Old 20-12-10, 21:54
George McKenzie George McKenzie is offline
Registered User
 
Join Date: Sep 2006
Location: Northern Alberta CA
Posts: 451
Default Truck sleeper sand blasting cabinnet

This truck sleeper was used to make a great sand blaster It is 32" wide x 84" long .It has a door on the end to put things in , a vent to let air in and you have to hook a shop vac up to the orther end .I made a hopper for the bottom to hold the sand or glass beads .I used a crusher screen to hold things on with a fine screen under it to catch the bigger particals of dirt .There is a trap door on the bottom for when you want to clean the sand when it gets too dirty Put a 1/4" plastic over the window then add some stickon sheets of plastic that can be changed when the wimdow gets hard to see through. I made two holders to which exter long gloves were added below the window .Mount a blaster gun in it and I hook that to my shop air compresser .85 lbs is enough pressure I put wheels on it so as to move it around the shop when not in use or, if more than one were to use it ,This is a super blaster for inside Very clean to work with George

Click image for larger version

Name:	IMGP1086.jpg
Views:	32
Size:	42.1 KB
ID:	39021 Click image for larger version

Name:	IMGP1089.jpg
Views:	26
Size:	85.5 KB
ID:	39022
__________________
George is hooked on OD
5 window DT969
8 ton Fruehauf trailer
M2A1Halftrack ,CMP #11 F15A1 #13 F15A1
RAF Fordson Tractor, 42 WLC HD
No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts
MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407
Hull plate # 7250 all have walk plate on back steps
1917 Patent modle amphibious army tank
Reply With Quote