Crafty Carriere Creations
Bob is at it again. This time his challenge was to figure a way to move his 20ft sea can around the yard. It was suggested that he weld some wheels onto the box, but he came up with a better idea. The following photos show his creativity. A sea can wide square tube axle is slipped into one of the forklift slots. The end assemblies are then attached to the tube and secured in place by some long pins. The front end of the box will be lifted by the tractor and the sea can will be moved like a rather large trailer.
The really interesting thing about the end assemblies is that they can be used for moving other items - such as CMPs that are missing wheels or have "frozen" wheels.
Good job in my opinion.
__________________
RHC
Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
Last edited by RHClarke; 15-06-10 at 19:56.
|