Andrew
In my AOP I replaced the guards,on each side where they go into the drivers compartment. they were originally welded in with stainless arc rods. (You cant gas cut it) I used an arc air gouger to cut it out. (easy)
Be careful with the rust. You will see what I said in Horsa's thread.
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|