This CFTO changed a number of the "operators manual" recommended pressures. I am positive there is a later version of this, as the pressures given for the 5/4 ton are way off. The 5/4 required a fairly low pressure in the front (30 psi if I recall) in order to prevent drive line wrap up on the full time four wheel drive.
Note as well that these are maximum pressures, which means a fully loaded vehicle.
Also, this was a CFTO that would have been in the maintenance section. These CFTOs were not really available to the users, and as such, if the maintenance section did not tell the MTs, then they would have never known about it.
|