Kevin
Does your carrier use the standard fan and fan extention, as used in a Brit. or Canadian carrier? The fan shroud in these consist of a bottom peice, which is mounted in between the bed rails, a left and right side, and the top peice. The Australian carriers use a one peice similar to what you show, but instead of the welded in section, they have the "v" cut out. I think this all depends on fan/ fan mount, type,distributor type, and radiator.
I understand the bottom spigots on the radiators are in three styles. 1. straight out the rear. 2. lower down (see a thread covered with pics, by Tony Smith) part out to the rear, and part out of the bottom. This is the one used in Aust carriers. 3. the spigot drops from the bottom tank, and then goes rearward. I think the 3rd one is probably used in the CMP truck.
Does any of this help?
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|