first i want to wish everybody a happy new year and good luck on all the restorations that going to be done this year. 
now it is very cold in holland so you can't do much, but i try anyway so I put the front window together. for the rubbers around the glass I used the same ones for the jeep, I used soap to get them in the frame and this works fine.
after some work the window was together again. after this I start with the engine crankshaft and bolted the flywheel on to it (watching my marks I made) and then placed it in the engine on it's new bearings.
I fastend the cups and it turns nicely. I also placed new expantion plugs in the side of the engine. I also putt the oilpomp and lines back in place and a new oil screen form dirk (it was still in it's original paper).
cheers jaap
