C8AX Deck mountings
Rob has covered it nicely Mick. Your deck mounting will be the same as the NZ made 30 cwt only shorter with similar brackets welded to the chassis.
With mine I figured that because the crossmembers are fitted inside the panels I would make each side and the front separately, fit all the cross members to the chassis and then fit the sides from each side and weld it up in place. Worked well.
Instead of drilling down through the timber crossmembers I made U shaped brackets that are bolted on but this was not really neccessary
Terry
__________________
Terry
F30 13 Cab CMP
Morris Commercial C8
|