[jaap de wit]

Now the crankshaft is at the machineshop I cleaned the oilpan and the oil nozzles in the pan. I had to weld some small holls in the pan.
The outside of the engine was cleaned of this thick coating of oil and dirt.
untill the crankshaft is back I started on the radiator. first I had to get all the rust / dirt out then to check if it is not leaking I filled it up with water and what I sow was no leaks for now.(mybe when the pump is pumping it starts leaking) I took it out of it's bracked and start cleaning.
cheers jaap