Hi Guys
The track pins with the double heads, are designed so that a few blows with a hammer will cause the heat to fall off, allowing the rest of the pin to be driven out with the track pin punch. This only works on one end, as the heads on each end are different. This pin would then be replaced with the joining pin, that is retained with a washer and split pin.
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|