????
What do you want to Know?
The main bearings, and big end (conrod) bearings are 010 thou. under size, and the bores are 030 thou oversze at the last rebuild.
the mains and big ends can go further to 060 under size, and the bores can go to 080 over size(maybe morewith pistons from the states.
You will have to measure it all up once it is pulled down to see how much wear there is. Best senario is new bearings, and rings, along with all the other stuff that needs doing.
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|